AVM B1 PCI v4.0 Specifikace stáhnout pdf (Strana 77)

Error Messages in OS/2

ISDN-Controller B1 PCI v4.0 – 14 Troubleshooting 77

Error Messages in OS/2

Error message on loading the controller: “ISDNLOAD: PCI

configuration error: no IRQ allocated.”

Possible cause: There are no IRQs available to the PCI bus.

Remedy: Run your BIOS setup (see the PC or the mainboard

manual) and release at least one free IRQ for use by PCI

adapters.

Example (Award BIOS): BIOS main menu, “PnP/PCI

Configuration”, “IRQ x assigned to: PCI/ISA PnP”.

If you combine adapters without plug-and-play support (Leg-

acy) such as the AVM ISDN-Controller B1 v3.0 in the same

system with PCI or ISA plug-and-play cards, the resources

(I/O addresses and IRQ levels) used by the hardware without

plug-and-play support should be so designated in the com-

puter’s BIOS.

Error Messages in Novell NetWare

Error message on loading the controller: “Installation Error.

Interrupt <xx> not available.”